Sunice White Opaque Window Film Self Adhesive Frosted White Privacy Protection Sun Blocking Heat Rejection Glass Tint for Home,Building 60in x 79in

Descriptions: Thickness:2mil(0.05mm) Visible Light Transmission:0% Infrared Rejection:100% Ultraviolet Rejection:100% NOTE:Before you begin to install ,please check the film carefully,if you find any creases,tears or other defects,please contact us immediately for advice.Don’t remove the backing sheet or attempt to fit your film if you think it is faulty.We are unable to accept returns or provide refunds if installation has been attempted. How to peel off the backing protective film? Method : Stick tape on both sides of the window film, and then separate tape. When the tape is separated, the backing transparent protective film can be peeled off. How to install? 1.Wash the window glass with soapy water. 2.Measure the size and cut the size of the film you want to stick. 3.Spray a lot of soapy water to the entire surface of the window and glue side of the film. 4.Peel off the backing sheet from film.Pick up the film and apply to your window. 5.Use squeegee to push out any water and air bubbles. 6.Trim the excess film at edges,using the window frame as a guide. 7.Finished.

• Easy to Install:Self Adhesive,peel and stick.Peeling off no glue residue.
• Sun blocking - Good heat rejection to save A/C energy.
• Privacy protection - The surface has a white frosted texture,which is translucent but opaque,protecting indoor privacy from prying eyes;modern and fashion decorative film.
• Anti-explosion- With adhesive backing,when the glass breaks,it can prevent glass fragments from flying and hurting people.
• Applicable scene - Suitable for various scenes such as bathroom, living room, office, etc.